Thinning Behr Deck Over Paint is a relatively easy process. First, pour some of the paint into a separate container. Next, use a stirring stick to mix in an appropriate amount of thinner. Stir the mixture until it is smooth, and then apply it to the deck.

How To Thin Behr Deck Over Paint

There are a few ways to thin Behr Deck Over paint. One is to use Behr’s own product, Deck Over thinner. Another is to use a mineral spirits or turpentine. Be sure to stir the paint well before adding any thinners.

To thin Behr deck over paint, you will need a stir stick, a bucket, and paint thinner. You can either buy Behr deck over paint thinner or use another type of paint thinner that is compatible with latex paints.

  • 4 hours) 4. using
  • thoroughly clean deck surface with a degreaser and power washer 2. apply a coat of behr deck over paint 3. wait for paint to dry (typically

-Be sure to stir the paint well before beginning to thin it. -To thin the paint, use a mixture of 50% paint and 50% water. -Test the mixture on a small area of the deck to be sure that it is the desired consistency. -If needed, add more water or paint to achieve the desired consistency.


Frequently Asked Questions

How Do I Fix Behr Deckover?

Behr Deckover is a product that is used to resurface and protect decks. If the Deckover product is applied incorrectly, it can cause bubbling and peeling. To fix these issues, the Deckover product must be removed and the deck must be prepared before a new coat of Deckover can be applied.

Can You Paint A Deck Over Paint?

Yes, you can paint a deck over paint, but it is not recommended. The paint will not adhere well to the existing paint, and the new paint will likely peel off.

How Do You Fix A Peeling Deck?

If the deck is wooden, you can use a wood sealant to help protect it from the weather and make it less likely to peel. If the deck is vinyl, you can use a vinyl sealant to help protect it from the weather and make it less likely to peel.


In Summary

To thin Behr deck over paint, use a paint thinner or mineral spirits. Pour the desired amount of thinner into a small container. Dip the brush into the thinner and then paint onto the deck. Wipe up any excess with a clean cloth.

Leave a Comment

Your email address will not be published. Required fields are marked *