When painting a fiberglass camper shell, it is important to use the correct type of paint and primer. The paint should be formulated specifically for fiberglass surfaces and the primer should be specifically for use on plastic. A good quality paint and primer can be expensive, but it is worth the investment to ensure a long-lasting finish. To begin, the surface of the camper shell should be cleaned and prepared with the appropriate primer. Once the primer has dried, a coat of

How To Paint A Fiberglass Camper Shell

If you are painting a fiberglass camper shell, you will need to use a primer that is specifically designed for fiberglass. You can find this primer at most automotive stores. Be sure to follow the instructions on the can carefully, as each primer may be a little different. Once the primer has dried, you can begin painting the camper shell with a latex paint. Again, be sure to follow the instructions on the can, as different paints may require different application techniques

-Paint brush -Fiberglass primer -Fiberglass paint -Paint roller -Tape -Paint tray

  • choose a color 2. tape off the areas you don’t want to paint 3. sand the surface of the camper shell 4. apply a primer 5. apply
  • 3 coats of paint, allowing each

There are a few things to consider when painting a fiberglass camper shell. The surface should be clean and free of any dirt, wax, or oil. A primer should be applied first, followed by a few coats of paint. It’s important to allow adequate drying time between coats.

Frequently Asked Questions

Can You Paint Directly On Fiberglass?

Yes, you can paint directly on fiberglass if the surface is properly prepared. The fiberglass must be clean and free of all waxes, polishes, or oils. You can use a degreaser to clean it, and then a primer to help the paint stick.

Will Rustoleum Paint Stick To Fiberglass?

Most Rustoleum paints will stick to fiberglass as long as the surface is clean, dry, and roughened with sandpaper.

What Kind Of Paint Will Stick To Fiberglass?

Acrylic paint will stick to fiberglass.

In Summary

Painting a fiberglass camper shell is a relatively easy process, but it is important to take your time and follow the correct steps in order to achieve the best results. First, make sure that the surface is clean and free of any dirt or dust. Then, use a primer to coat the surface and help the paint adhere better. Once the primer has dried, apply a coat of paint in your desired color. Finally, seal the paint with a clear coat to protect it from scratches and UV damage.

Leave a Comment

Your email address will not be published.