How To Paint Your Ar15

In order to paint your AR-15, you will need the following supplies: -Paint primer -Paint brush -Paint thinner -Gun cleaning solvent -Paper towel or rag – masking tape -Electrical tape -Newspaper or cardboard -enamel spray paint in the color of your choice. Instructions: 1. Begin by disassembling the AR

How To Paint Your Ar15

To paint your AR-15, you will need the following supplies: -Paint gun or spray paint can -Protective mask -Paint primer -Paint in desired color or colors First, make sure your AR-15 is completely clean and free of any dirt or debris. Next, apply a coat of primer to the entire gun using the paint gun or spray paint can. Once the primer has dried, apply your desired color(s) of

-Paints in various colors (I used olive drab, tan, and black) -Paintbrush -Gun cleaning kit -Compressed air canister -Lubricant

  • strip your ar
  • 5 of all accessories and components. 2. clean the rifle using your preferred method. 3. mask off any areas you do not want to paint using tape or newspaper. 4. apply a primer

1. Choose the right color 2. Prepare the surface 3. Apply the paint 4. Let it dry 5. Finish up


Frequently Asked Questions

What Kind Of Paint Can I Use On My Ar-15?

There is no one definitive answer to this question. Many factors such as the climate where you live, the type of AR-15, and the desired finish will affect the type of paint you should use. That said, most paints that are designed for firearms should be able to be used on an AR-15.

Can I Spray Paint My Rifle?

Spraying paint on a firearm is not recommended and may void the warranty.

Can I Spray Paint An Ar-15?

You can spray paint an AR-15, but it is not recommended. The paint may not properly adhere to the gun, and it could eventually chip or flake off, which could lead to corrosion.


Wrap-Up

How to paint your AR-15 is a fairly simple process. First, remove the bolt carrier group and the upper receiver from the lower receiver. Next, use a degreaser to clean all the surfaces that will be painted. After that, apply a primer to all the surfaces. Once the primer has dried, apply a finish coat in the color of your choice. Be sure to allow enough time for the finish coat to dry completely before reassembling the rifle.

Leave a Comment

Your email address will not be published. Required fields are marked *

x