How To Paint Drip Edge

When it comes to painting the exterior of your home, there are a lot of things to think about. One of the most important, but often overlooked parts of exterior painting is painting the drip edge. The drip edge is the part of the roof that hangs over the edge of the wall and prevents water from running down the side of your house. It’s important to paint the drip edge because if you don’t, it will eventually rust and fall off.

How To Paint Drip Edge

Drip edge is an important part of roofing because it helps keep water from seeping under the shingles and rotting the roof deck. There are two main types of drip edge: metal and plastic. Metal drip edge is more common and can be made from aluminum, galvanized steel, or copper. Plastic drip edge is less common, but it’s a good option if you live in a hurricane-prone area because it’s more wind resistant.

To paint drip edge, you will need: -Paint -Paintbrush -Drip edge

  • Clean the drip edge and the area around it of any debris or dirt
  • Tape off the area around the drip edge to protect it from paint
  • Paint the drip edge using a brush or roller. allow the

-Drip edge is a necessary component of any roofing system, as it helps to keep water from leaking into the home. -There are a few different ways to paint drip edge, but the most common is to use a brush. -Make sure the paint is mixed well and applied in even strokes. -Be sure to cover all of the drip edge with paint, and allow it to dry completely before using.

Frequently Asked Questions

What Color Should Roof Drip Edge Be?

Roof drip edge should be the same color as the roofing material.

What Color Should Flashing Be?

There is no definitive answer to this question as it depends on the specific situation and context in which the flashing is taking place. In some cases, flashing may need to be a specific color in order to be visible or noticeable, while in other cases, it may be more aesthetically pleasing if it is a different color.

Should Drip Edge Flashing Be Painted?

Yes, drip edge flashing should be painted. Painting the flashing will help to protect it from the elements and extend its lifespan.


There are a few different ways to paint drip edge, but the most common is to use a paint brush. First, make sure the surface is clean and dry. Then, apply a thin layer of paint to the drip edge and let it dry. Repeat this process until the drip edge is fully covered.

Leave a Comment

Your email address will not be published. Required fields are marked *