When opening a Behr Ultra paint can, always wear gloves to avoid getting paint on your skin. Pry off the lid of the can with a screwdriver and set it aside. Pour the paint into a paint tray and begin painting. If you need to reseal the can, replace the lid and use a hammer to tap the edges of the lid until it’s secure.
How To Open Behr Ultra Paint Can
There can be a few ways to open a Behr Ultra paint can. One way is to use a paint can opener to pierce the lid and then pull it off. Another way is to use a hammer and nail to make a hole in the lid, then use pliers to pull off the lid. A third way is to cut the top off the can with a sharp knife.
-You will need a hammer, screwdriver, can opener, and a pry bar -The paint can has a pop top that is held down by a metal tab. You will need to use the hammer to bang the tab until it breaks free. Be careful not to hit the paint can too hard or you could dent it. -Once the tab is free, you can use the screwdriver to pry open the lid. Again, be careful not to damage the paint
- Hold the can in an upright position
- Remove the top of the can with a paint opener
- Pour the paint into a paint tray
-Be sure to have a can opener that is appropriate for the size of the paint can you are opening. -If the paint can has been sitting for a while, it may be difficult to open. Try running the can opener around the edge of the lid a few times before trying to open it. -If all else fails, you may need to use a hammer and chisel to open the can.
Frequently Asked Questions
How Do You Get A Lid Off A Paint Can?
There are a few ways to get a lid off a paint can. One way is to use a screwdriver to pry the lid off. Another way is to use a can opener to cut around the circumference of the lid.
How Do You Open Paint With A Screwdriver?
The screwdriver is inserted into the paint can’s lid and turned to pry it open.
How Do I Open Paint Without A Can Opener?
You can try using a knife or a screwdriver to pry the lid off the paint can.
There is no one definitive way to open a Behr Ultra paint can. Some people find that using a screwdriver to pry off the lid works well, while others prefer to use a can opener.